General Contractor in St. Anthony, ID
When a Fremont County property owner needs a pole barn framed to carry a real Teton Basin snow load, or a downtown St. Anthony building brought up to code during a remodel, they need a contractor who can also build the custom steel that goes into the job, not just subcontract it out and hope it fits. We are Davis Machine LLC, a licensed general contractor and family-owned metal fabrication shop that has worked in St. Anthony since the 1950s.
Licensed Contracting Backed by Decades of Metal Fabrication
St. Anthony is the Fremont County seat, sitting along the Henrys Fork of the Snake River where the valley narrows toward the St. Anthony Sand Dunes and the Yellowstone Highway corridor that carries traffic north toward Ashton and the park. Winters here bring heavy, wet snow loads and a long hard freeze, and the older brick storefronts downtown were not built to today’s energy or structural code. We have fabricated metal for this exact climate and this exact building stock for decades, so when we take on a general contracting project, whether it is a new ag building, a remodel, or an addition, we are not guessing at what holds up in a Fremont County winter.
Because our contracting crew and our fabrication shop are the same company, a project that needs a custom steel beam, a support bracket, or a handrail does not wait on an outside vendor’s schedule. You talk directly with the people building your project, not a call center or a subcontractor relay.
What Sets Our General Contracting Work Apart
- Licensed general contractor with an in-house metal fabrication shop
- Our own press brake and shear, so custom steel components are built on-site, not outsourced
- Better Business Bureau superior rating
- Decades of building for eastern Idaho’s snow load and freeze-thaw conditions
- Stainless, aluminum, and steel fabrication available for any build
- In-house powder coating and painting for exposed steel and trim
- Farm and ag building experience alongside residential and commercial work
- Direct access to the crew building your project, not a call center
Ag Buildings and Shops Built for a Working Fremont County Property
A pole barn or shop building in St. Anthony needs a roof pitch and truss spacing sized for real snow load, not a generic plan pulled from a warmer climate. We frame and build ag buildings, shops, and outbuildings to hold up through an eastern Idaho winter, and because we run our own fabrication shop, we can fabricate custom steel trusses, brackets, or support beams in-house rather than waiting on a supplier that may not stock what a specific span requires.
Property along the Henrys Fork or near the Fremont-Madison Irrigation District’s canal system often needs a building sited and graded around drainage and water rights considerations that a contractor from outside the area would not think to ask about. We have built here long enough to know which lots flood, which soils shift, and which details actually matter once winter sets in.
Beyond new ag buildings, we handle shop additions, equipment bays, and the structural repairs that come with an aging outbuilding.
Call Us Today!
Remodels, Additions, and New Construction
Whether the job is a kitchen remodel in one of St. Anthony’s older downtown-area homes, a room addition, or new construction on a lot outside town, we manage the project as a licensed contractor from permitting through final walkthrough. Older homes near downtown often carry outdated wiring, framing, or foundation work that needs to be addressed before a remodel can move forward, and we flag those issues early instead of discovering them mid-project.
Because we fabricate our own metal, custom handrails, structural brackets, and steel accents that a typical contractor would order from a catalog can instead be built to the exact dimensions of your project, matched to your home or building rather than the other way around.
The Range of General Contracting Work We Handle
Our crew covers residential, commercial, and agricultural contracting throughout St. Anthony and greater Fremont County, including:
- Pole barns, shops, and equipment buildings
- Room additions and remodels
- New residential and commercial construction
- Foundation and structural repair
- Custom handrails, beams, and steel trim fabricated in-house
- Decking and outdoor structures
- Farm and ranch building projects
- Permitting and code compliance coordination
If your project is not on this list, tell us what you are trying to build and we will tell you honestly whether we are the right contractor for it.
Contact Us Today!
Why a Contractor With a Fabrication Shop Behind It Matters Here
St. Anthony’s growing season and its ag economy mean a lot of contracting work here is tied to working farms and ranches, where a delayed shop building or a mismatched steel bracket costs real money during planting or harvest. We prioritize scheduling around those seasonal windows when a client needs it.
How a General Contracting Project Works With Us
Most St. Anthony projects move through the same four steps: you describe the building, remodel, or repair you need; we walk the site and confirm scope, permitting, and specifications with you directly; our crew handles the construction, calling on our own fabrication shop for any custom steel the project requires; and we finish with an inspection walkthrough before handoff. Because the contracting crew and the fabrication shop are one company, a design change mid-project does not mean restarting the conversation with a different vendor.
Call Us Today!
Local Conditions That Shape How We Build in St. Anthony
Fremont County sits at higher elevation than much of the Snake River plain to the south, and that means colder temperatures, heavier snow accumulation, and a longer frost season than contractors from Idaho Falls or Rexburg may be used to designing around. Foundations here need to go deeper, roof framing needs to carry more weight, and outdoor steel needs a finish that holds up to repeated freeze-thaw cycles rather than just looking good on installation day.
The Henrys Fork and the irrigation network that supports Fremont County’s potato, grain, and cattle operations also shape where and how we build. A shop or barn sited too close to a canal, or graded without accounting for spring runoff, causes problems long after the framing is done. We factor site conditions like these into every general contracting project, not just the fabrication work we have always done.
Common Questions About Hiring a General Contractor in St. Anthony
Are you a licensed general contractor in St. Anthony, ID?
Yes, Davis Machine LLC operates as a licensed general contractor (Idaho General Contractor Registration #6671782) in addition to our metal fabrication work, and we carry a Better Business Bureau superior rating.
How much does a pole barn or shop building cost in St. Anthony?
Cost depends on the building’s size, foundation type, and finish, since a basic equipment bay and a fully insulated shop with custom steel trusses are priced very differently. We provide a quote after walking your site and reviewing what the building needs to carry through a Fremont County winter.
Can you build custom steel components as part of a construction project?
Yes, because our contracting crew and our metal fabrication shop are the same company, we can fabricate custom beams, brackets, and handrails in-house rather than ordering standard parts from a catalog. This keeps your project on one schedule instead of splitting it across a contractor and a separate fabricator.
Do you handle both remodels and new construction?
Yes, we take on room additions, remodels of older St. Anthony homes and buildings, and new residential, commercial, and agricultural construction. Send us your project details and we will scope out what it needs, including any permitting.
How do you handle permitting and Fremont County code requirements?
We coordinate permitting and code compliance directly as part of managing your project, so you are not tracking down inspections or paperwork on your own. Requirements vary by project type and location, so we confirm the specifics with the county once we know the scope of your build.
Do you serve areas outside St. Anthony, like Ashton or Rexburg?
Yes, while St. Anthony is a core part of our service area, we take on general contracting and fabrication projects throughout Fremont County and into neighboring Madison County, including Rexburg, Ashton, and Sugar City. Call to confirm we cover your specific location.
Get a Quote on General Contracting in St. Anthony, ID
If you need a new ag building, a remodel, an addition, or custom steel work built into your construction project, contact our shop directly. We will walk your site, talk through your specifications, and build to fit your project, not the other way around.
Decades of Building Behind Every St. Anthony Project
At Davis Machine LLC, we have operated as a family-owned fabrication shop since the 1950s and now bring that same in-house capability to our general contracting work, backed by a superior rating with the Better Business Bureau. That track record comes from treating every project, whether it is a single handrail or a full ag building, with the same attention to fit and finish.